Office card installation precautions

Office card installation is finished, but in order to later quality problems, I suggest you first check the installation process and material quality!

1. Ordinary office cards will be equipped with corresponding file cabinets and other storage space, first of all need to check the material of this kind of storage space, if there are obvious bugs or paint off foam, the surface process is not good, let alone the internal details!!

2. There are more internal details, the only thing that affects the whole is the hardness of the material, and you can see whether there is a rotten place inside

3. Judging from the overall office card position, whether the structure base is flat, shake it to see the shaking situation, and observe the flatness and splitting of the desktop and cabinet door

4. On the details, it is necessary to pay attention to the edge sealing and the wrapping surface should be flat and not open. Rounded corners and veneers such joints must be tight, veneer furniture problems are often tilted up, so in the process of acceptance need to pay attention to, pick the corners with your hand, if it is very easy to tilt up, gelatin must be a problem

On the office card acceptance and accessories, this will greatly affect his service life, less and more than one screw sometimes the difference is really big! Be sure to check to all parts installed, to avoid later on-site maintenance caused by wrangling!!